[AusNOG] 48v active PoE to 24v passive PoE converters

[Ben Hohnke]

Hi Scott,
You need one of these:
https://routerboard.com/RBGPOE-CON-HP

We have hundreds of these deployed around the country, they do the job.

Ben

On Fri, Aug 26, 2016 at 7:21 PM Scott Wilson <siridar at gmail.com> wrote:

> Hi All,
>
> I picked up a pair of ubiquiti 802.11ac AP's the other day, and when I
> plugged them into my cisco PoE switch, I found that my switch is the active
> type (48v) and the AP's are the passive type (24v) - because, of course,
> there's two PoE standards.
>
> Has anyone had any experience with the various 48v to 24v PoE converters
> that are out there? Any horror stories? Was thinking of using the mikrotik
> ones, they're only about 40 bucks.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160826/d76f9366/attachment.html>