[AusNOG] Cost effective 10G full feed BGP router for IPv4 & IPv6

[Nathan Brookfield]

Here's another option, new to market, not sure of the price yet but it looks like a very tidy option.  If everything else in the Ubiquiti range is an example, the price will be good! 10GBASE-T copper ports as well which is not something you see to often but great for use within the same rack / cage.


No BGP on-board but still a good little switch when you're on a budget.


https://www.ubnt.com/edgemax/edgeswitch-16-xg/


<https://www.ubnt.com/edgemax/edgeswitch-16-xg/>EdgeSwitch 16 XG Model: ES-16-XG


* (12) SFP+ Ports

* (4) 10G RJ45 Ports

* (1) RJ45 Serial Console Port

* Non-Blocking Throughput: 160 Gbps

* Switching Capacity: 320 Gbps

* Forwarding Rate: 238.10 Mpps

* Rack Mountable with Rack-Mount Brackets (Included)

* DC Input Option (Redundant or Stand-Alone)


Switching Performance:


The EdgeSwitch XG offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the EdgeSwitch XG supports up to 160 Gbps.


10G High-Capacity Links:


The EdgeSwitch XG offers maximum performance and low latency as an aggregation switch. For fiber connectivity, it features 12 SFP+ ports. For copper connectivity, the EdgeSwitch XG offers four RJ45 ports that support 10GBASE-T, the standard for 10 Gbps connections using Cat6 (or higher) cabling and RJ45 connectors.


Kindest Regards,

Nathan Brookfield (VK2NAB)



Chief Executive Officer

Simtronic Technologies Pty Ltd



Local: (02) 4749 4949 | Fax: (02) 4749 4950 | Direct: (02) 4749 4951

Web: http://www.simtronic.com.au<http://www.simtronic.com.au/> | E-mail: nathan.brookfield at simtronic.com.au<mailto:nathan.brookfield at simtronic.com.au>

________________________________
From: AusNOG <ausnog-bounces at lists.ausnog.net> on behalf of Matthew Barnett <enterprisenetworks at outlook.com>
Sent: Friday, 5 August 2016 9:17 AM
To: ausnog at ausnog.net
Subject: [AusNOG] Cost effective 10G full feed BGP router for IPv4 & IPv6


I am after suggestions for a 10G router with at least 10 x 10G ports within a 1RU form factor, any suggestions?


Full routing table is a must.


Thanks Matt


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160808/dfe45eb3/attachment.html>