[AusNOG] Cost effective 10G full feed BGP router for IPv4 & IPv6

[Alex Samad]

On 5 August 2016 at 10:19, John Gavrilita <jgavrilita at thesummitgroup.com.au>
wrote:

> If you’re ok with single-threaded BGP process on the RouterOS (I’m not),
> then 2xCCR1072, in 1U rack space, back to back, and two or three bonded 10G
> ethernets between them would perhaps satisfy your requirements?


One thing I have found with the smaller 1036 cousin is that it will only
route single tcp streams at 1Gb/s  if you want to route faster than that,
then the mikrotek are not the solution,


It can handle multiple 1Gb/s tcp streams, I have consistanly gotten up to
9.8Gb/s ..

They advise from mikrotek is V7 will fix the issue. something about pegging
a tcp stream to a single cpu and that being limited to 1G..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160805/5052ad53/attachment.html>