[AusNOG] remote power cycle device

[Chris]

On 15/04/2016 4:01 PM, Andrew Khoo wrote:
> i am seeking out a device that will let me trigger (via TCP/IP or
> 4G/LTE) a power cycle. what i am thinking of is a device with a IEC C13
> and C14 (AC in and out) and some smarts in the middle.
>

I have a bunch of an earlier model of these:

http://www.wti.com/p-188-nps-8hd16-3-network-power-switch-pdu-dual-16a-240v-8iec-c13.aspx

Never had any problems with them. I have used some of the other WTI 
products as well, same thing, no issues at all.

The ones I have can be accessed via a web interface to power on/power 
off/reboot or via telnet/ssh. Dual inputs is handy for gear with two 
PSU's, they also sell ones with an ATS for gear that is only single PSU 
(if you want dual feeds for them).