[AusNOG] Internode IPv6 Support

[O'Connor, Daniel]

> On 19 Oct 2015, at 13:42, Delan Azabani <delan at azabani.com> wrote:
> I'm not an Internode employee, but I'm a customer who has IPv6 working.

Ditto.

I have it working to a FreeBSD box.
 - mpd for PPPoE
 - dhcp6c to get prefix
 - rtadvd to publix route to the LAN.

Also, you need to turn it on in the internode dash board (pretty sure it's still off by default), or change the username to user at ipv6.internode.on.net.

> What does your setup look like? In short:
> 
> • Use one PPP session for both protocols.
> • Acquire an IPv4 address with PPP IPCP (RFC 1332).
> • Negotiate an IPv6 interface identifier with PPP IPv6CP (RFC 5072).
> • Acquire a dynamic /64 prefix with NDP Router Solicitation (RFC 4861).
> • Acquire a static /56 prefix with DHCPv6 IA_PD (RFC 3633).
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog

--
Daniel O'Connor
"The nice thing about standards is that there
are so many of them to choose from."
 -- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C