[AusNOG] Internode IPv6 Support

[Damien Gardner Jnr]

I was assuming he meant Telstra Business.. Having just switched my home
office from Telstra Business to Residential to go to FTTN, I'm really
missing native IPv6

On 26 November 2015 at 22:06, Robert Hudson <hudrob at gmail.com> wrote:

> When did Telstra start offering IPv6 services?
>
> I'd love to see that on more of their products (consumer grade for
> example)...
>
> On 26 November 2015 at 20:11, David Beveridge <dave at bevhost.com> wrote:
>
>> Problem is resolved,
>> Cancelled Internode
>> Ordered Telstra
>> It worked straight away.
>>
>> dave
>>
>>
>> On Tue, Oct 20, 2015 at 1:51 PM, David Beveridge <dave at bevhost.com>
>> wrote:
>>
>>> Still haven't heard from internode!  is there anyone there?...
>>>
>>> On Tue, Oct 20, 2015 at 12:31 PM, Mark Smith <markzzzsmith at gmail.com>
>>> wrote:
>>>
>>>> On 20 October 2015 at 12:17, Karl Auer <kauer at biplane.com.au> wrote:
>>>> > On Tue, 2015-10-20 at 11:16 +1100, Mark Newton wrote:
>>>> >> On Oct 19, 2015, at 3:01 PM, Karl Auer <kauer at biplane.com.au> wrote:
>>>> >> > I don't get a prefix on the outside interface. There is no
>>>> technical
>>>> >> > need for one, either
>>>> >> The point was to make sure that a user with a single PC plugged into
>>>> >> the ethernet jack on their bridged-mode CPE would have a working
>>>> >> internet service.
>>>> >
>>>> > But I don't get one. Waah! Why don't I get one?
>>>> >
>>>> > My theory: The MikroTik only has a DHCPv6-PD client configured on the
>>>> > outside interface, not a DHCPv6 client. So it can pick up a prefix OK,
>>>> > but won't get a GUA. Router interfaces don't do SLAAC,
>>>>
>>>> Actually, routers doing SLAAC on their WAN interface is supported in
>>>> RFC7084, "Basic Requirements for IPv6 Customer Edge Routers" (W-1 and
>>>> WAA-1 requirements).
>>>>
>>>> I think SLAAC on the PE-CE link and DHCPv6-PD for the downstream is
>>>> the most accommodating model as, as Mark said, it allows a PC to be
>>>> directly plugged into the service, which is useful even if just for
>>>> troubleshooting of the service.
>>>>
>>>> > so it won't get a
>>>> > GUA that way either - but a singleton PC on a bridge-mode CPE *would*
>>>> do
>>>> > DHCPv6 and/or SLAAC, so would get an address.
>>>> >
>>>> > I must try plugging a box directly into my bridge-mode CPE to see what
>>>> > happens.
>>>> >
>>>>
>>>
>>> So I just did that, I used my fedora 20 laptop with rp-pppoe &
>>> wide-dhcpv6.
>>> As soon as ppp0 comes up, it has an IPv4 and IPv6 address on it.
>>>
>>> When I run the dhcp6c client in PD mode, It keeps sending SOLICIT
>>> messages and receives nothing back, I used tcpdump to confirm, nothing
>>> comes back.
>>>
>>> Perhaps this has something to be with the fact it's an NBN connection;
>>> who knows.
>>>
>>> Thanks everyone for your help, I was hoping that someone from Internode
>>> who actually knows IPv6 would contact me, but I don't think that will
>>> happen.
>>>
>>> dave
>>>
>>>
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>


-- 

Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
rendrag at rendrag.net -  http://www.rendrag.net/
--
We rode on the winds of the rising storm,
 We ran to the sounds of thunder.
We danced among the lightning bolts,
 and tore the world asunder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20151126/529c21c4/attachment.html>