[AusNOG] vyatta netflow and AS export

[Mark Anthony Delfin]

Thanks Rusell.  I will try sflow instead of netflow.

On Fri, Jun 5, 2015 at 7:54 AM, Russell Brenner <rbrenner at brocade.com>
wrote:

>  Yes, you'll be able to pull that data from your collector.
>
>
>
> Russell Brenner
> Systems Engineer
> Brocade
> Suite 524, 1 Queens Road, Melbourne 3004
> M. +61.412.869.959
> www.brocade.com
>
>
>
>
> On Thu, Jun 4, 2015 at 1:41 PM -0700, "Russell Brenner" <
> rbrenner at Brocade.com> wrote:
>
>  Anyway, not sure about the old non-Brocade VyOS platform, but the
> Brocade Vyatta 5400 supports both net flow and Sflow whilst the 5600
> supports sflow only.
>
>  Going forward it'll be better to use Sflow since netflow is largely
> unsupported outside of Cisco, but I'm open to be corrected if that's not
> 100% true.
>
>  When you say AS info, do you mean BGP payload info in the actual packet
> payload?
>
> Russell Brenner
> Systems Engineer
> Brocade
> Suite 524, 1 Queens Road, Melbourne 3004
> M. +61.412.869.959
> www.brocade.com
>
>
>
>
> On Thu, Jun 4, 2015 at 1:20 PM -0700, "Russell Brenner" <
> rbrenner at Brocade.com> wrote:
>
>  Hi Mark,
>
>  Are you talking about VyOS or our 5400 and 5600 Vyatta vRouters?
>
> Russell Brenner
> Systems Engineer
> Brocade
> Suite 524, 1 Queens Road, Melbourne 3004
> M. +61.412.869.959
> www.brocade.com
>
>
>
>
> On Thu, Jun 4, 2015 at 1:13 PM -0700, "Mark Anthony Delfin" <
> mark at delfin.me> wrote:
>
>  Hi List,
>
>  Do vyatta virtual routers supports netflow exports  with AS info?
>
>  Thank you.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150605/e61fbbee/attachment.html>