[AusNOG] Cisco ASR1002-F for Broadband Aggregation

[Bruce Forster]

http://www.gossamer-threads.com/lists/cisco/nsp/137525

1002F wont take a full table. but if your using it as a lac/lns does this
matter to you? i guess it depends on your design

On Sat, Jan 31, 2015 at 11:03 AM, Nathan Brookfield <
Nathan.Brookfield at simtronic.com.au> wrote:

>  Hi Guys,
>
>  I am looking for some first hand advise from anyone who may have or may
> be using a Cisco ASR1002-F as a LAC or LNS.
>
>  I've been doing some research online for a few hours and information is
> very few and far between.
>
>  I am looking to deploy at small interstate PoP's where 2.5G will be
> suitable but need to use for VPLS/MPLS to the edge for some access tails.
>
>  Lots of information about the 1002 but some comments from people
> suggesting the 'Fixed' version is limited.
>
>  Any help would be GREATLY appreciated.
>
> Kindest Regards,
> Nathan Brookfield
>
> Chief Executive Officer
> Simtronic Technologies Pty Ltd
>
>  Web: http://simtronic.com.au
> Phone: 1300 592 330
> Fax: (02) 4749 4950
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>


-- 
Regards,

Bruce
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150202/61177105/attachment.html>