[AusNOG] Industrial ADSL2+ Modem/Router

[Peter Tiggerdine]

Take a look at the 819HG if 3G delivery of connectivity is okay. We put
this in passively ventilated cabinet on well heads.

On Thu, Aug 27, 2015 at 9:23 AM, Cameron Murray <cameron.murray at gmail.com>
wrote:

> Have been looking at these however needs to spend its life in a roadside
> cabinet at a set of traffic lights.
>
> On Thu, Aug 27, 2015 at 9:22 AM, Nathan Brookfield <
> Nathan.Brookfield at simtronic.com.au> wrote:
>
>> Cannot go past the Cisco 887-M or some of the cheaper TPLink modems so
>> surprisingly well and you can disable NAT.
>>
>> Nathan Brookfield
>> Chief Executive Officer
>>
>> Simtronic Technologies Pty Ltd
>> http://www.simtronic.com.au
>>
>> On 27 Aug 2015, at 09:08, Cameron Murray <cameron.murray at gmail.com>
>> wrote:
>>
>> Guys,
>>
>> I'm chasing recommendations for a reliable industrial adsl2+ Annex M
>> modem. I've found plenty overseas however locally resources seem limited.
>>
>> Key features; it must have is a Ping WatchDog and the Ability to disable
>> NAT.
>>
>> TIA
>>
>> Cameron.
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20150827/bfc36b2d/attachment.html>