[AusNOG] Cisco 7200 VXR g1 with full routes

[Patrick Cole]

Matt,

I've done it and it will work fine.  Just remember that the router will
be under considerable load for the period of time during convergence as the
small CPU in the G1 takes a while to get through it all.

Pat

Thu, Sep 25, 2014 at 11:16:19AM +1030, Matthew Barnett wrote:


>     
> 
>    I have a few Cisco 7200 running npe g1 cards with 1g of memory terminating
>    two IP providers but I  only accept a default route which stops me from
>    using effectively both providers for outbound.
> 
>    I want to now accept full routes to send traffic out the best path rather
>    than using just one path. Anyone using g1 cards taking two full routing
>    tables without any issues ?
> 
>    Matthew

> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog