[AusNOG] Mikrotik & 3G/4G Telstra dongle usb - OOB testing

[Ross [Eve IT]]

Thanks Ashley, and everyone else that responded :)


On Thu, Nov 27, 2014 at 2:20 PM, Ashley Breeden <ash at url.net.au> wrote:

> Hi Ross,
>
> The last one I setup was fairly straight forward, but wasn’t for OOB it
> was a customers site.  It’s usually just a matter of getting the data and
> info channels correct.
>
> The steps I used were:
>
> - Connect the 4G card
> - Power Cycle the Router
> - Typically the the MT will add a PPP-Client under /interface pop-client,
> I remove it and run this:
>
> add add-default-route=yes allow=pap,chap,mschap1,mschap2 apn=*telstra.internet
> *data-channel=3 dial-command=ATDT dial-on-demand=no \
>     disabled=no info-channel=2 keepalive-timeout=30 max-mru=1500
> max-mtu=1500 modem-init="" mrru=disabled name=ppp-out1 null-modem=no \
>     password="" phone=*99# pin="" port=*usb3* profile=default
> use-peer-dns=no user=“"
>
>
> You might need to change the port and APN.  To find out the port run /port
> print
>
> Hope this helps.
>
> Regards,
>
> *Ashley Breeden*
> URL Networks Pty Ltd
> *Email:* ash at url.net.au
> *WWW:* http://www.url.net.au
> *Phone:* 1300 33 11 78
> *Direct:* 03 9008 5901
> *Mobile:* 0411 112 056
> *Twitter: *@urlnetworks
>
>
>
>
>
>
>
> On 27 Nov 2014, at 2:10 pm, Ross [Eve IT] <ross at eve-it.net> wrote:
>
> Hi all,
>
> Does anyone have a working config that don't mind sharing for a Mikrotik
> routerboard using a Telstra USB dongle, 3G and 4G ?
> RB750UP
>
> Cheers,
> Ross.
>  _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20141127/3c5aeb8a/attachment.html>