[AusNOG] Question regarding VRRP

[Daniel Watson]

Gday Nick

Responded to this one in private :D


Regards,
Daniel Watson
Network Administrator / Network Operations Manager

E Daniel at GloVine.com.au
W www.GloVine.com.au

From: Nick Pratley [mailto:nick.pratley at serversaustralia.com.au]
Sent: Sunday, 4 May 2014 5:57 PM
To: Daniel Watson
Cc: ausnog at lists.ausnog.net; aussag at lists.aussag.net
Subject: Re: [AusNOG] Question regarding VRRP

Daniel,

If you use IPs from another subnet, you'll need to run OSPF / iBGP between the routers.

Don't forget, you'll need to do this for each network if they are in different vlans.

How many vlans are you talking here?

What switch are you using? Would it be better to get a L3 switch and run two routers with OSPF to switch and routed ports, either way the switch will be the single point of failure, and there is no need toying with VRRP.

Sent from my iPhone

On 4 May 2014, at 5:49 pm, Daniel Watson <Daniel at glovine.com.au<mailto:Daniel at glovine.com.au>> wrote:
Gday Guys

Just to clarify

Router 1 eth0 IP 10.0.1.1/24<http://10.0.1.1/24>
Router 2 eth0 IP 10.0.1.2/24<http://10.0.1.2/24>

Is this correct?


Regards,
Daniel Watson
Network Administrator / Network Operations Manager

E Daniel at GloVine.com.au<mailto:Daniel at GloVine.com.au>
W www.GloVine.com.au<http://www.GloVine.com.au>

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140504/1fee1eda/attachment.html>