[AusNOG] Question regarding VRRP

[Joseph Goldman]

Hi Daniel, 

They each have an IP in the same subnet for the protocol to talk, then each has the virtual ip usually added as a /32 that the protocol determines if should be active or not. 

Thanks, 
Joe

On 4 May 2014 17:45:16 GMT+10:00, Daniel Watson <Daniel at glovine.com.au> wrote:
>Gday Folks
>
>Ive got a question regarding VRRP,
>
>When setting up VRRP between two routers, do I use exactly the same
>config on the secondary router in regards to interface IP's ect?  Or
>will they need their own IP's for each router?
>
>Hope this makes sense
>
>Any advice would be appreciated.
>
>
>Regards,
>Daniel Watson
>Network Administrator / Network Operations Manager
>
>E Daniel at GloVine.com.au
>W www.GloVine.com.au
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>AusNOG mailing list
>AusNOG at lists.ausnog.net
>http://lists.ausnog.net/mailman/listinfo/ausnog

-- 
Sent from my Android device with Pigeon.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140504/41c702da/attachment.html>