[AusNOG] routeros v Vyatta

[Tom Berryman]

Support for multiple VRFs?
Tom

-----Original Message-----
From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Mehmet Akcin
Sent: Wednesday, 29 January 2014 3:45 PM
To: Paul Gear
Cc: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] routeros v Vyatta

http://bird.network.cz - rock solid. Carrier grade. Czech made.

mehmet

On Jan 28, 2014, at 8:40 PM, Paul Gear <ausnog at libertysys.com.au> wrote:

> On 01/29/2014 02:05 PM, Alex Samad - Yieldbroker wrote:
>> Hi
>> 
>> Been using routerOS for nearly 6 months, like the interface and cost :)
>> 
>> But I am now running into limitation in routing speed, I can't seem to push them past 1Gb/s running them on ESX 5.5 with the e1000 driver, I am looking into trying the e1000e driver there is some hope I might be able to get more than 1G.
>> 
>> So I come back to the list to find out if people have been using Vyatta and how they find it.  How does it compare to routerOS.
>> 
>> Key features I am looking at
>> 
>> OSPF
>> BGP ... including filtering etc etc
>> Firewall
>> Routing
> 
> Hi Alex,
> 
> My take: Vyatta is more stable and offers better customisation, RouterOS concentrates on cramming features in.  Which approach you prefer depends on your requirements.
> 
> I very much prefer Vyatta Core (actually, the VyOS community fork [1]) to RouterOS, mostly because I like the interface better, and the Linux underpinnings are exposed (including standard Linux shell scripting and the like).  Not only that, with VyOS there are full instructions for customising the distribution to exactly your requirements.
> 
> I haven't pushed the performance hard yet - the most I've done is saturate a 100 Mbps Telstra fibre from our head office to our data centre through an IPsec tunnel, but soon I'll be pushing up to 1 Gbps between data centres.  I expect this to go very well with modern hardware.  Brocade claim that they can get up to 40 Gbps in a VM using their proprietary Vyatta Subscription Edition, which implements hardware offload on recent Intel CPUs.  Have your American Express card handy.  Ubiquiti claim that they can get 1 Mpps on their EdgeOS (forked from Vyatta) devices, which include hardware offload as well.
> 
> The OSPF & BGP implementation in VyOS is based on Quagga, so it's single instance only.  This usually isn't a problem with virtualised routers, but it's a limitation that RouterOS overcame in recent versions.  However, the OSPF implementation is more stable in my opinion.  In one RouterOS OSPF deployment, I spent weeks trying to troubleshoot a tricky problem with LSA propagation and ended up spitting the dummy and just overriding the behaviour with a static route.
> 
> I've found BGP on VyOS does what I need it to, but I have a very simple BGP setup.  It has all the standard route-map and prefix-list features, and I've been told it has no problems keeping a full table, although I haven't done it.
> 
> The zone-based firewall on VyOS has kept up to speed with everything I've asked of it.  At one client I've developed firewall generation scripts that we use to maintain about 30 VMs with a very small number of spreadsheets.
> 
> Regards,
> Paul
> 
> [1] http://vyos.net/ -  They forked Vyatta Core because Brocade seems to have basically stopped work on it to focus on their proprietary version.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog