[AusNOG] Cisco GRE Tunnel weirdness

joe at apcs.com.au joe at apcs.com.au
Fri Jan 3 18:06:24 EST 2014


Not specifically iperf but I was able to send 1500byte ping request with 
df bit set, outside of the tunnel, with no issues. (1501 bytes failed)

This indicated to me that the path between the 2 sites should be OK. Let 
me know if you disagree?

On 2014-01-03 17:51, Nathan Brookfield wrote:
> It sounds like an issue with a hop in the path. Have you tried iperf
> or similar tests outside of the tunnel to both end points?
> 
> Kindest Regards, Nathan Brookfield
> 
> Chief Executive Officer
> Simtronic Technologies Pty Ltd
> 
> Web: http://simtronic.com.au [1]
> Phone: 1300 592 330
> Fax: (02) 4749 4950
> 
>  On 3 Jan 2014, at 17:49, "joe at apcs.com.au" <joe at apcs.com.au> wrote:
> 
> Hi List,
> 
>  I have a GRE tunnel between 2 sites over a link limited to 1500 MTU.
> 
>  As such we have mtu set to 1440 and mss-adjust to 1400 on both ends.
> This is overly cautious probably but it was working.
> 
>  Anyway - it had been working quite fine for some time, but randomly
> we started seeing massive performance issues. Bandwidth throughput
> halved and ping times sky rocketed (~50ms to ~1000ms). We tried
> bringing down the tunnel and back up, no luck, and even power cycled
> each end (Cisco 3945's), no luck.
> 
>  We have confirmed that the config's had not been changed for weeks.
> Neither end had crashed and rebooted. The tunnel itself did not go
> down between 'working' and 'not working'. Performance and ping times
> via the tunnel endpoint address' is fine, proving (to me) that the
> networks between the 2 sites are not the issue, but the tunnel itself.
> No links are saturated, and CPU performance is quite tame (both before
> and during the issue)
> 
>  For now we have gone back to backup path but I haven't been able to
> find similar problems online, and my own Cisco tunnel experience
> leaves me empty so far.
> 
>  Has anyone experienced a similar issue? A working tunnel suddenly
> having major performance issues?
> 
>  Thanks,
>  Joe
>  _______________________________________________
>  AusNOG mailing list
>  AusNOG at lists.ausnog.net
>  http://lists.ausnog.net/mailman/listinfo/ausnog [2]
> 
> 
> Links:
> ------
> [1] http://simtronic.com.au
> [2] http://lists.ausnog.net/mailman/listinfo/ausnog


More information about the AusNOG mailing list