[AusNOG] Brocade - Vyatta BGP Session

Nathan Brookfield Nathan.Brookfield at simtronic.com.au
Wed Feb 12 11:27:57 EST 2014


Daniel,

The error kind of speaks for itself to be honest.  Without posting configurations from each side there is not much help we can provide here.

I can say though that I have personally configured and brought up many Brocade MLE to Vyatta sessions without this type of issue occurring so I would be shocked if it wasn't a config issue.

Kindest Regards,
Nathan Brookfield

Chief Executive Officer
Simtronic Technologies Pty Ltd

Web: http://simtronic.com.au
Phone: 1300 592 330
Fax: (02) 4749 4950

On 12 Feb 2014, at 11:18, "Daniel Watson" <daniel at glovine.com.au<mailto:daniel at glovine.com.au>> wrote:

Gday Noggers

We currently have a VXC Across MegaPort to another company whom provide DDOS protection for our Melbourne network,

We are running a Vyatta VM for our router, and the other company are running a Brocade router,

We have attempted to setup a BGP Session over the VXC from the other company to our router and have confirmed from multiple sources that the settings are correct, however we have an issue which follows

 Messages:    Open    Update  KeepAlive Notification Refresh-Req
       Sent    : 24      0       0         11           0
       Received: 11      0       0         0            0
    Last Connection Reset Reason:Bad Peer AS Number
    Notification Sent:     Open Message Error/Bad Peer AS Number

The main error being Bad Peer AS Number which neither of us have seen before

Any advice / assistance would be appreciated.

D.
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140212/e49d38fd/attachment.html>


More information about the AusNOG mailing list