[AusNOG] Brocade - Vyatta BGP Session

[Skeeve Stevens]

If your basic layer 2 (mac) an layer 3 (ip) working?

Then check the MTU and make sure it is ok.


...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/theispguy ; blog: www.theispguy.com


The Experts Who The Experts Call
Juniper - Cisco - Cloud - Consulting - IPv4 Brokering


On Wed, Feb 12, 2014 at 11:17 AM, Daniel Watson <daniel at glovine.com.au>wrote:

>  Gday Noggers
>
>  We currently have a VXC Across MegaPort to another company whom provide
> DDOS protection for our Melbourne network,
>
>  We are running a Vyatta VM for our router, and the other company are
> running a Brocade router,
>
>  We have attempted to setup a BGP Session over the VXC from the other
> company to our router and have confirmed from multiple sources that the
> settings are correct, however we have an issue which follows
>
>   Messages:    Open    Update  KeepAlive Notification Refresh-Req
>        Sent    : 24      0       0         11           0
>        Received: 11      0       0         0            0
>     Last Connection Reset Reason:Bad Peer AS Number
>     Notification Sent:     Open Message Error/Bad Peer AS Number
>
>  The main error being Bad Peer AS Number which neither of us have seen
> before
>
>  Any advice / assistance would be appreciated.
>
>  D.
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140212/2c3f8ab9/attachment.html>