[AusNOG] Juniper SRX when to use proxy arp

[Mark Anthony Delfin]

Thanks Guys

On Tue, Dec 2, 2014 at 9:43 PM, Simon Dixon <simon at dicko.net.au> wrote:

> Mark,
>
> The following KB from Juniper helps explain when to and not to use proxy
> arp.
>
> http://kb.juniper.net/InfoCenter/index?page=content&id=KB21785
>
> Regards
>
> Simon.
>
>
> On 2 December 2014 at 18:03, Mark Anthony Delfin <mark at delfin.me> wrote:
>
>> Hi List,
>>
>> I have a couple of SRX240/250 clusters and it has  destination NATs.
>> Destination IP is not the SRX interface.   Do I need to set up proxy arp.
>> It seems to be working without it?
>>
>> What will be the possible situations that i will need to have(or not to
>> have) proxy-arp settings?
>>
>> Thank you.
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>> --
>>
>> Dicko.
>>
>> <http://lists.ausnog.net/mailman/listinfo/ausnog>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20141203/4177d8d0/attachment.html>