[AusNOG] Cooling Pads for Juniper SRX?

[Skeeve Stevens]

Hi all,

I have an issue with some Juniper SRX100's overheating.  I've seen them get
hot before, especially placed on something similar (i.e. another SRX100)...
and given warnings of overheating, but never shut down.... but this
situation is different.

These SRX100's are shutting down as they are reaching a core temperature of
70c as they are located in racks that are outside in the sun and on
particularly hot days - around 32c-36c they overheat and turn themselves
off.

Some might say this is understandable... and I sort of agree.  Although
their operating system says they are good to 40c, that doesn't really seem
to be the case.  The SRX110's are a little more tolerant given they are
bigger units - but have the same operating environmentals (along with the
EX2200-C).  But at the moment I have the SRX100's and would prefer not to
swap them out as it will cost significantly.

Then one of my staff had (what I think) a good idea today... to use cooling
pads... maybe like the ones you use for laptops or something.

So I am wondering if anyone has been some solid - not $20 junk or such..
but something that runs off mains, and works well 24x7x365 - maybe even
something that only kicks in once a certain temperature has been reached.

I thought if anywhere, a couple of these mailing lists might have had some
experience with these kinds of things - especially for those who have built
regional pops and have had to cool some equipment.

Thanks all!

...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/theispguy ; blog: www.theispguy.com


The Experts Who The Experts Call
Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20141202/78d500ae/attachment.html>