[AusNOG] Question about hardware spec for a DC

[Alex Samad - Yieldbroker]

Should have asked, any one in Aus used one of these are they certified for use in Aus and who supplies them ?

A

> -----Original Message-----
> From: Tony de Francesco [mailto:tonyd at pue.com.au]
> Sent: Thursday, 24 April 2014 11:02 AM
> To: Alex Samad - Yieldbroker; ausnog at lists.ausnog.net
> Subject: RE: [AusNOG] Question about hardware spec for a DC
> 
> Alex,
> 
> If you happen to end up with a piece of kit that is single corded only you can
> buy aftermarket dual cord interface kits that have an internal Auto Transfer
> Switch.
> 
> I saw some very cool stuff recently from Zonit
> (http://www.zonit.com/micro-ats/)
> 
> 
> Kind Regards
> 
> Tony de Francesco
> 
> 
> -----Original Message-----
> From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Alex
> Samad - Yieldbroker
> Sent: Thursday, 24 April 2014 10:47 AM
> To: ausnog at lists.ausnog.net
> Subject: [AusNOG] Question about hardware spec for a DC
> 
> A question for the list.
> 
> When you buy equipment for a DC, would you expect it to come with dual
> power supplies, either as an option or as a standard?
> 
> 
> Alex
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog