[AusNOG] RIPE Atlas probes at AusNOG 2013

[Wolfgang Nagele]

Power via USB, yes. DHCP by default but you can configure it static. For that you have to first hook it onto a DHCP enabled network where it can pull the static config from. Config happens via the web portal of Atlas.

On 9/5/13 2:40 PM, "Sean K. Finn" <sean.finn at ozservers.com.au<mailto:sean.finn at ozservers.com.au>> wrote:

Hi Wolfgang.

The probes have USB as well as Ethernet as I recall.

Is the USB used for power-only?

And, do the probes get an IP address via DHCP?

Sean.

From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Wolfgang Nagele
Sent: Thursday, September 05, 2013 2:24 PM
To: ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>
Subject: Re: [AusNOG] RIPE Atlas probes at AusNOG 2013

Ok loads of interest. We'll meet at the registration desk after the last session closes at about 4:45pm today.

On 9/5/13 1:56 PM, "Wolfgang Nagele" <wolfgang.nagele at ausregistry.com.au<mailto:wolfgang.nagele at ausregistry.com.au>> wrote:

Reminder. Still got a bunch available. Let me know if you are interested.

On 8/31/13 1:55 PM, "Wolfgang Nagele" <wolfgang.nagele at ausregistry.com.au<mailto:wolfgang.nagele at ausregistry.com.au>> wrote:

Hi,

I'll be bringing along a few RIPE Atlas probes during AusNOG 2013 to hand out.

If you haven't heard of RIPE Atlas yet, read here to find out what it's all about: https://atlas.ripe.net<https://atlas.ripe.net/>

I will hand the probes to hosts depending on the location where they intend to install them. Preference will be given to areas that don't have a lot of coverage yet.
If you're interested, please send me a reply (off-list) indicating the location where you'd want to host a probe.
You can see the current coverage here: https://atlas.ripe.net/results/maps/network-coverage/

Regards,
Wolfgang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130905/d46dd992/attachment.html>