[AusNOG] Q sonicwall and juniper

[Skeeve Stevens]

+1.

Juniper clustering was developed, coded, and not tested by Satan himself.


...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/networkceoau ; blog: www.network-ceo.net


The Experts Who The Experts Call
Juniper - Cisco - Cloud


On Mon, Jul 8, 2013 at 11:47 AM, James Braunegg <james.braunegg at micron21.com
> wrote:

> I like the Juniper SRX 3400 / SRX 5600 firewalls  the nice things about
> these is you can run per device redundant routing engines, both of these
> support hardware line rate 10gbit ports and are full ASIC based.****
>
> ** **
>
> If you don’t actually need 10gbit throughput you could look at the SRX 650
> which can support 10gbit ports but all processing is done in software not
> in ASIC****
>
> ** **
>
> Juniper had some issues with clustering the SRX in the early days but
> these seem to be all but gone now...****
>
> ** **
>
> That being said I still avoid clustering where possible and much prefer
> two single devices not linked in anyway other than standard routing
> protocols.****
>
> ** **
>
> Juniper also has a fantastic CLI … one of the best I’ve ever used.****
>
> ** **
>
> Do you have a budget in mind  ?****
>
> ** **
>
> Kindest Regards****
>
> ** **
>
> *James Braunegg
> **P:*  1300 769 972  |  *M:*  0488 997 207 |  *D:*  (03) 9751 7616****
>
> *E:*   james.braunegg at micron21.com  |  *ABN:*  12 109 977 666
> *W:*  www.micron21.com/ip-transit  *T:* @micron21****
>
> ** **
>
>
> [image: Description: Description: Description: Description: M21.jpg]
> This message is intended for the addressee named above. It may contain
> privileged or confidential information. If you are not the intended
> recipient of this message you must not use, copy, distribute or disclose it
> to anyone other than the addressee. If you have received this message in
> error please return the message to the sender by replying to it and then
> delete the message from your computer.****
>
> ** **
>
> ** **
>
> ** **
>
> -----Original Message-----
> From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Alex
> Samad - Yieldbroker
> Sent: Monday, July 08, 2013 10:01 AM
> To: ausnog at lists.ausnog.net
> Subject: [AusNOG] Q sonicwall and juniper
>
> ** **
>
> Hi****
>
> ** **
>
> Was wondering what the groups thoughts where on sonicwall and maybe in
> relation to juniper.****
>
> ** **
>
> Most of my experience has been with Cisco and linux (firewalls)****
>
> ** **
>
> In particular I am looking at****
>
> ** **
>
> Exterior FW (facing internet)****
>
> Or ****
>
> Interior FW (not facing Internet)****
>
> ** **
>
> Like to have a cluster (HA setup)****
>
> Like to have min 2 x 10G fibre ports per dev and some 1G ports****
>
> ** **
>
> Don't need any sort of deep packet inspection****
>
> ** **
>
> I prefer CLI, my initial googling seems to suggest sonic is not very cli
> friendly at all****
>
> ** **
>
> Again my initial investigation leads me to NSA 5600 (or NSA 6600), not
> sure what the comparably Juniper might be.****
>
> ** **
>
> Thanks****
>
> ** **
>
> Alex****
>
> _______________________________________________****
>
> AusNOG mailing list****
>
> AusNOG at lists.ausnog.net****
>
> http://lists.ausnog.net/mailman/listinfo/ausnog****
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130708/6a4617ca/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2683 bytes
Desc: not available
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130708/6a4617ca/attachment.jpg>