[AusNOG] OOB Console - What are people using?

[Brendan Baker]

Or you could get an ACM with integrated 3G, OpenVPN on board, cisco pinout rj45 serial ports, that uses 6 watts :)


On 21/08/2013, at 11:29 AM, Mark Dignam <mark at innaloo.net> wrote:

>  
> +1 for the Supermicro Atom + dedicated ADSL or 3G dongle to “phone home” via Openvpn and a USB serial adapter to the router/switch ports.
>  
> Its only a half depth machine, uses like 30-40 watts and just sits there, acting as a Nagios node inside the remote network…
>  
> Dig.
>  
>  
> From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Matt Perkins
> Sent: Wednesday, 21 August 2013 7:43 AM
> To: ausnog at lists.ausnog.net
> Subject: Re: [AusNOG] OOB Console - What are people using?
>  
> We did something like this for a long time. We used a bunch of Cisco 2500's with 2 octacables. (handy because they plug directly into console ports without a rollover) 2500's are also  cheap on ebay. We did trade this method in  some time ago for a Supermicro appliance type 1RU Atom PC with SSD disk running linux and a ADSL modem.  It then spans out via USB to multiple rack mounted 16 port USB Serial adapters.  (there's heaps of different brands on google) This is easily expandable with a USB hub to multiple 16 port Units.  The Unit's we have are called S1600-RU's but I cant seem to find them any more there's a lot of brands that appear the same. They are FTDI based. 
> 
> Matt.
> 
> 
> On 21/08/13 9:25 AM, Skeeve Stevens wrote:
> Hey all,
>  
> I am setting up an Out-Of-Band for a customer at a couple of datacentres.
>  
> The kit being accessed is Cisco, Juniper, Checkpoint and some HP C7000 Chassis.
>  
> I am thinking a DSL service into a Juniper SRX110 with an Avocent ACS5000/16port.
>  
> This would give the ability to ssh, telnet, VPN into the SRX and then either IP to devices or the serial console server which then consoles into all the connected equipment.
>  
> The reason for the SRX is that it can be accessed via the normal internal network, as well as via the OOB path.
>  
> Now, while I initially thought of the Avocent (Emerson) ACS 16 porter... they are like $2k... which I think is a little expensive.
>  
> Does anyone else have any recommendations on a good console/terminal server?
>  
> Also, is anyone sitting on a pile of Cisco rollover console cables (RJ45 to Rj45 - NOT the DB9 ones).  I'm looking to buy a few.
>  
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130821/bc816aac/attachment.html>