[AusNOG] DWDM recommendations

[Tom Storey]

I'll give a shout out for BTI. Ive used their gear quite extensively for
the last two years and Im somewhat fond of it.

They have a 40ch 2RU mux, and a new 96ch 4RU (IIRC) mux. In the 1RU range
they have a passive shelf that can take 1/2/4/8 port mux modules which can
be daisy chained.


On 16 August 2013 04:22, Will Tardy <will at fetchtv.com.au> wrote:

> Hi All,
>
> Any recommendations of a cheap and decent brand for passive DWDM units to
> split dark fibre into 10GE waves? Lengths from 8km to 25km. Using Cisco XFP
> DWDM optics.
>
> (Our Cisco ASR1K LAN-PHY 10G SPAs seem to only support DWDM XFP optics, so
> it appears CWDM for 10GE isn't an option?)
>
> We only need 2 waves at first, at most 8 in the future.
>
>
> Thanks,
> Will
>
> --
>
> Will Tardy
>
> Network Operations Manager
>
>
>
> *P*   + 61(0) 2 8014 5531
>
> *M*   + 61(0) 400 910 549
>
> *E*   will at fetchtv.com.au
>
> *W*  www.fetchtv.com.au
>
>
> FetchTV Pty Ltd, Level 5, 61 Lavender Street, Milsons Point, NSW 2061
>
>
> FetchTV Pty Ltd, Level 5, 61 Lavender Street, Milsons Point, NSW 2061
>
> <http://www.fetchtv.com.au/>
>
> This email is sent by FetchTV Pty Ltd (ABN 36 130 669 500). The contents
> of this communication may be
> confidential, legally privileged and/or copyright material. If you are not
> the intended recipient, any use,
> disclosure or copying of this communication is expressed prohibited. If
> you have received this email in error,
> please notify the sender and delete it immediately.
>
> <http://facebook.com/fetchtv>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130816/553a3ebe/attachment.html>