[AusNOG] DWDM recommendations

[David Wilde]

This gear also matches 8 of the Cisco DWDM X2/XFP/Xenpak wavelengths, which you’re already using.

Careful of the added loss which it introduces into the link (ie. reducing the reach), which is increased again if you add in the CWDM muxes.  Should be fine for 8-25km however.



From: AusNOG [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of pilgrim.net.au
Sent: Friday, 16 August 2013 1:33 PM
To: Will Tardy; ausnog at lists.ausnog.net
Subject: Re: [AusNOG] DWDM recommendations

‎Have you looked at Cisco's EWDM (passive DWDM) offering? Not too expensive and at those distances you shouldn't need to amplify.

You can also bolt on a passive CWDM solution to add extra capacity.

‎http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_data_sheet0900aecd806a1c36.html


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130816/ed0bf48e/attachment.html>