[AusNOG] 7301 Broadband Aggregation?

[Graeme Allen]

Yes, not on G1 or G2.....

On 27/03/12 16:36, Skeeve Stevens wrote:
> According to: 
> http://www.cisco.com/en/US/docs/routers/7200/configuration/7200_port_adapter_config_guidelines/3875In.html 
>
>
> "Do not calculate bandwidth points for an I/O controller if it is 
> installed in the Cisco 7200 VXR router with an NPE-G1 or NPE-G2. With 
> the NPE-G1 or NPE-G2, I/O controllers do not use bandwidth or 
> bandwidth points."
>
> Look at Table 1-2
>
> ...Skeeve
>
> *Skeeve Stevens, CEO*
>
> eintellego Pty Ltd
> skeeve at eintellego.net <mailto:skeeve at eintellego.net> ; 
> www.eintellego.net <http://www.eintellego.net>
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellego <http://facebook.com/eintellego>
>
> twitter.com/networkceoau <http://twitter.com/networkceoau> ; 
> www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
>
>
>
> On Tue, Mar 27, 2012 at 16:18, Graeme Allen <gallen at mytelecom.com.au 
> <mailto:gallen at mytelecom.com.au>> wrote:
>
>     The C7200-I/O-GE+E does burn the bandwidth points, so with that
>     in, you can only have 1 more "high speed" card on the other bus....
>
>
>     On 27/03/12 16:07, shthead wrote:
>
>         On 27/03/2012 1:00 PM, McDonald Richards wrote:
>
>             Just remember to try and use the GE ports on the NPE
>             module instead
>             of the ones on the PCI bus if you care about performance.
>
>         On that note you can use the C7200-I/O-GE+E to get an extra
>         gig port
>         without using and B/W points on the PCI bus (its compatible
>         with the
>         G1, I'm not sure about the G2, but I can't see anything saying its
>         not). It may work out cheaper than buying a PA-GE card as well.
>         _______________________________________________
>         AusNOG mailing list
>         AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
>         http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
>     _______________________________________________
>     AusNOG mailing list
>     AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
>     http://lists.ausnog.net/mailman/listinfo/ausnog
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120327/661dc7d8/attachment.html>