[AusNOG] Cisco 857W and DSL2?

[Jake Anderson]

http://en.wikipedia.org/wiki/File:ADSL_Line_Rate_Attenuation.gif
for line rates (roughly)

On 03/23/2012 01:43 PM, Skeeve Stevens wrote:
> Excellent news.  Thanks guys.
>
> Is there anything anywhere which has the list of attenuations a 
> service should achieve for certain speeds?  or ranges, etc.
>
>
> *Skeeve Stevens, CEO*
>
> eintellego Pty Ltd
> skeeve at eintellego.net <mailto:skeeve at eintellego.net> ; 
> www.eintellego.net <http://www.eintellego.net>
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellego <http://facebook.com/eintellego>
>
> twitter.com/networkceoau <http://twitter.com/networkceoau> ; 
> www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
>
>
>
> On Fri, Mar 23, 2012 at 13:41, Solly, Matthew <matt at mtt.me 
> <mailto:matt at mtt.me>> wrote:
>
>     Guy is right, that's not an ADSL2+ provisioned port - rather one
>     that is provisioned at 512/512k.
>
>     The customer would need to contact Telstra support and have them
>     fix it.
>
>     On 23/03/2012, at 1:33 PM, Skeeve Stevens wrote:
>
>>     Hmmm Looks good.
>>
>>     DS / US
>>
>>     Noise Margin:    25.0 dB                         22.0 dB
>>     Output Power:    15.0 dBm                        12.0 dBm
>>     Attenuation:     40.0 dB                         20.0 dB
>>
>>     *Skeeve Stevens, CEO*
>>     eintellego Pty Ltd
>>     skeeve at eintellego.net <mailto:skeeve at eintellego.net> ;
>>     www.eintellego.net <http://www.eintellego.net/>
>>     Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>>     Cell +61 (0)414 753 383 ; skype://skeeve
>>     facebook.com/eintellego <http://facebook.com/eintellego>
>>     twitter.com/networkceoau <http://twitter.com/networkceoau> ;
>>     www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>>     PO Box 7726, Baulkham Hills, NSW 1755 Australia
>>
>>     The Experts Who The Experts Call
>>     Juniper - Cisco – Brocade - IBM
>>
>>
>>
>>     On Fri, Mar 23, 2012 at 13:27, Guy Ellis <guy at traverse.com.au
>>     <mailto:guy at traverse.com.au>> wrote:
>>
>>         99% sure this is a provisioning problem with Telstra, seen it
>>         at least 10 time before.
>>
>>         Check the SNR (downstream), if it's >> 10dB then the line
>>         provisioning has not been updated.
>>
>>          - G.
>>
>>
>>
>>         On 23/03/2012 1:17 PM, Skeeve Stevens wrote:
>>>         Hey all,
>>>
>>>         I've done some googling and the answers were inconclusive.
>>>
>>>         I have someone whose just called me re a DSL router I
>>>         installed some 4 years ago for a simple change.
>>>
>>>         I noticed that it was real slow, and checked the speed, and
>>>         it is still trained up as a 1.5/512
>>>
>>>         Speed (kbps):             0             1536             0  
>>>                     512
>>>
>>>         It is running: System image file is
>>>         "flash:c850-advsecurityk9-mz.124-15.T7.bin"
>>>
>>>         But I am not sure if that firmware (or does the DSL firmware
>>>         need upgrading?) supports DSL2.
>>>
>>>         It is a Telstra service in a metroish area, so I assume all
>>>         DSL1 ports are actually DSL2 ports.
>>>
>>>         Apparently the customer authorised Telstra upgrading it to
>>>         DSL2 a long time ago... but perhaps the modem cant support it.
>>>
>>>         Init FW:         init_3.0.010_nobist.bin
>>>         Operation FW:    AMR-3.0.010.bin
>>>
>>>
>>>
>>>
>>>         *Skeeve Stevens, CEO*
>>>         eintellego Pty Ltd
>>>         skeeve at eintellego.net <mailto:skeeve at eintellego.net> ;
>>>         www.eintellego.net <http://www.eintellego.net/>
>>>         Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>>>         Cell +61 (0)414 753 383 ; skype://skeeve
>>>         facebook.com/eintellego <http://facebook.com/eintellego>
>>>         twitter.com/networkceoau <http://twitter.com/networkceoau> ;
>>>         www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>>>         PO Box 7726, Baulkham Hills, NSW 1755 Australia
>>>
>>>         The Experts Who The Experts Call
>>>         Juniper - Cisco – Brocade - IBM
>>>
>>>
>>>
>>>         _______________________________________________
>>>         AusNOG mailing list
>>>         AusNOG at lists.ausnog.net  <mailto:AusNOG at lists.ausnog.net>
>>>         http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>>
>>         -- 
>>         Guy Ellis
>>         guy at traverse.com.au  <mailto:guy at traverse.com.au>
>>         www.traverse.com.au  <http://www.traverse.com.au/>
>>         T: +61 3 9386 4430 M: +61 419 398 234
>>
>>
>>     _______________________________________________
>>     AusNOG mailing list
>>     AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
>>     http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120323/0a19b316/attachment.html>