[AusNOG] Cisco 857W and DSL2?

Skeeve Stevens skeeve+ausnog at eintellego.net
Fri Mar 23 13:49:50 EST 2012


Brad,

I didn't notice how round they were.... very interesting.


*Skeeve Stevens, CEO*
eintellego Pty Ltd
skeeve at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellego

twitter.com/networkceoau ; www.linkedin.com/in/skeeve

PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Fri, Mar 23, 2012 at 13:44, Brad Gould <bradley at internode.com.au> wrote:

>  ADSL 1 is good for 8Mbps.
>
>  Such round numbers are suspiciously like a line profile, not a naturally
> occurring sync speed.
>
>  Brad
>
> --
> Brad Gould
> Network Engineer
> Internode Network Operations
>
>
> On 23/03/2012, at 13:34, "Skeeve Stevens" <skeeve+ausnog at eintellego.net>
> wrote:
>
>   Hmmm Looks good.
>
>  DS / US
>
>  Noise Margin:    25.0 dB                         22.0 dB
> Output Power:    15.0 dBm                        12.0 dBm
> Attenuation:     40.0 dB                         20.0 dB
>
>   *Skeeve Stevens, CEO*
>  eintellego Pty Ltd
> skeeve at eintellego.net ; www.eintellego.net
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellego
>
> twitter.com/networkceoau ; www.linkedin.com/in/skeeve
>
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>  The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
>
>
>
> On Fri, Mar 23, 2012 at 13:27, Guy Ellis <guy at traverse.com.au> wrote:
>
>> 99% sure this is a provisioning problem with Telstra, seen it at least 10
>> time before.
>>
>> Check the SNR (downstream), if it's >> 10dB then the line provisioning
>> has not been updated.
>>
>>  - G.
>>
>>
>>
>> On 23/03/2012 1:17 PM, Skeeve Stevens wrote:
>>
>> Hey all,
>>
>>  I've done some googling and the answers were inconclusive.
>>
>>  I have someone whose just called me re a DSL router I installed some 4
>> years ago for a simple change.
>>
>>  I noticed that it was real slow, and checked the speed, and it is still
>> trained up as a 1.5/512
>>
>>  Speed (kbps):             0             1536             0
>>   512
>>
>>  It is running: System image file is
>> "flash:c850-advsecurityk9-mz.124-15.T7.bin"
>>
>>  But I am not sure if that firmware (or does the DSL firmware need
>> upgrading?) supports DSL2.
>>
>>  It is a Telstra service in a metroish area, so I assume all DSL1 ports
>> are actually DSL2 ports.
>>
>>  Apparently the customer authorised Telstra upgrading it to DSL2 a long
>> time ago... but perhaps the modem cant support it.
>>
>>  Init FW:         init_3.0.010_nobist.bin
>> Operation FW:    AMR-3.0.010.bin
>>
>>
>>
>>
>>   *Skeeve Stevens, CEO*
>>  eintellego Pty Ltd
>> skeeve at eintellego.net ; www.eintellego.net
>>
>> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>>
>> Cell +61 (0)414 753 383 ; skype://skeeve
>>
>> facebook.com/eintellego
>>
>> twitter.com/networkceoau ; www.linkedin.com/in/skeeve
>>
>> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>>
>>  The Experts Who The Experts Call
>> Juniper - Cisco – Brocade - IBM
>>
>>
>>
>> _______________________________________________
>> AusNOG mailing listAusNOG at lists.ausnog.nethttp://lists.ausnog.net/mailman/listinfo/ausnog
>>
>>
>>
>> --
>> Guy Ellisguy at traverse.com.auwww.traverse.com.au
>> T: +61 3 9386 4430 M: +61 419 398 234
>>
>>
>   _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120323/8c82000f/attachment.html>


More information about the AusNOG mailing list