[AusNOG] Cisco 857W and DSL2?

[Skeeve Stevens]

Hmmm Looks good.

DS / US

Noise Margin:    25.0 dB                         22.0 dB
Output Power:    15.0 dBm                        12.0 dBm
Attenuation:     40.0 dB                         20.0 dB

*Skeeve Stevens, CEO*
eintellego Pty Ltd
skeeve at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellego

twitter.com/networkceoau ; www.linkedin.com/in/skeeve

PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Fri, Mar 23, 2012 at 13:27, Guy Ellis <guy at traverse.com.au> wrote:

>  99% sure this is a provisioning problem with Telstra, seen it at least 10
> time before.
>
> Check the SNR (downstream), if it's >> 10dB then the line provisioning has
> not been updated.
>
>  - G.
>
>
>
> On 23/03/2012 1:17 PM, Skeeve Stevens wrote:
>
> Hey all,
>
>  I've done some googling and the answers were inconclusive.
>
>  I have someone whose just called me re a DSL router I installed some 4
> years ago for a simple change.
>
>  I noticed that it was real slow, and checked the speed, and it is still
> trained up as a 1.5/512
>
>  Speed (kbps):             0             1536             0
> 512
>
>  It is running: System image file is
> "flash:c850-advsecurityk9-mz.124-15.T7.bin"
>
>  But I am not sure if that firmware (or does the DSL firmware need
> upgrading?) supports DSL2.
>
>  It is a Telstra service in a metroish area, so I assume all DSL1 ports
> are actually DSL2 ports.
>
>  Apparently the customer authorised Telstra upgrading it to DSL2 a long
> time ago... but perhaps the modem cant support it.
>
>  Init FW:         init_3.0.010_nobist.bin
> Operation FW:    AMR-3.0.010.bin
>
>
>
>
>   *Skeeve Stevens, CEO*
>  eintellego Pty Ltd
> skeeve at eintellego.net ; www.eintellego.net
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellego
>
> twitter.com/networkceoau ; www.linkedin.com/in/skeeve
>
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>  The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
>
>
>
> _______________________________________________
> AusNOG mailing listAusNOG at lists.ausnog.nethttp://lists.ausnog.net/mailman/listinfo/ausnog
>
>
>
> --
> Guy Ellisguy at traverse.com.auwww.traverse.com.au
> T: +61 3 9386 4430 M: +61 419 398 234
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120323/9fe46b1a/attachment.html>