[AusNOG] 100G/200G/400G coming down the pipe (so to speak)

Darren Ward (darrward) darrward at cisco.com
Thu Mar 8 12:38:02 EST 2012


Absolutely :)

Again keeping non vendor, you'll see that the release of single channel
40G and 100G DWDM short haul optics (haven't seen any plans above 10G
for CWDM from anyone as yet) for their routing/switching/datacentre
products to connect at least metro distances without requiring whiz bang
long haul pieces using the specialised transponder/muxponder modules

The point regards spectral use then becomes more important as passive
filters are fixed width filters with no flexible spectrum or switching
capability that doesn't involve sneakernet ;)

Darren

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net
[mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Paul Brooks
Sent: Thursday, 8 March 2012 12:34 PM
To: Ben Dale
Cc: ausnog at ausnog.net
Subject: Re: [AusNOG] 100G/200G/400G coming down the pipe (so to speak)

On 8/03/2012 11:18 AM, Ben Dale wrote:
>
> That's interesting to hear - in the (albeit limited) space we play
(intra-DC, minimal amplification/re-gen, 70-80% of customers under
80km), this tipping point hasn't really occurred yet.
>
> Spectrally it's 4 lambdas vs. 10 so the amplification difference is
marginal in these shorter hauls, but it's the 100G transponders that
still seem quite astronomical compared to the standard 10G
transponder/dense-wave XFP combo.

At the risk of going low-rent, I'd be at least looking at coloured
optics and some passive CWDM filters/combiners in that sort of
shorter-range deployment. No need to build a spaceship to travel across
town :-;.

P.

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog



More information about the AusNOG mailing list