[AusNOG] Cheap Second Hand Cisco Q-in-Q Switch

[Johann Lo]

Not sure how much second hand,  but Cisco ME3400 would be a much better choice IMO - its designed as a WAN carrier Ethernet device rather than an access device.

2x copper, 2x dual purpose (SFP/copper) all gigE

Bonus: they route too with the correctly licensed firmware (cough cough).

I've regularly maxed them out @ 1G throughput no worries.

Johann Lo
Senior IP Network Engineer
Asian Pacific Telecommunications
p: 03 9863 9863
e: Johann.Lo at aptel.com.au




Notices - (1) If it appears that this email has been sent to you in error, please delete it (including any attachments) immediately and let the sender know by reply email. This email may contain confidential information and may be privileged. You may be acting unlawfully if you use, disclose, keep or rely upon that information. (2) This email and any attachment may not be free of viruses or defects. The sender is not liable for anything whatsoever including damage, loss and liability that you experience because you have received this email and notes that you should ensure that your IT system is properly safeguarded. (3) If this email is not sent in direct connection with the company's business, the company does not endorse the content.


-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Nathan Brookfield
Sent: Friday, 7 December 2012 2:07 PM
To: James Mcintosh; ausnog at lists.ausnog.net
Subject: Re: [AusNOG] Cheap Second Hand Cisco Q-in-Q Switch

Sorry if you are looking for something that takes GBIC's which could be used for Gigabit Ethernet or Fibre the 3550-12G may be sutiable and I thin kthey are around $200.00 now without any optics etc

Kindest Regards,
Nathan Brookfield (VK2NAB)

Chief Executive Officer
Simtronic Technologies Pty Ltd

Local: (02) 4749 4949 | Fax: (02) 4749 4950 | Direct: (02) 4749 4951
Web: http://www.simtronic.com.au | E-mail: nathan.brookfield at simtronic.com.au

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of James Mcintosh
Sent: Friday, 7 December 2012 2:04 PM
To: ausnog at lists.ausnog.net
Subject: [AusNOG] Cheap Second Hand Cisco Q-in-Q Switch

Hi Noggers,

Just looking on eBay for a cheapo Cisco switch that supports Q-in-Q.

Does anyone know off hand what models of older, end of life Cisco switches support Q-in-Q?. My only must is that it runs IOS rather that CatOS. Also would prefer one that can take a couple of GigE ports or GBICs

Thanks!


-James

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog

***********************************
This email has been scanned by Asian Pacific Telecommunications Hosted Security.
Powered by TrendMicro.
For more information please visit www.aptel.com.au
***********************************