[AusNOG] LAC/LNS hardware recommendation

[Julien Goodwin]

On 25/11/11 20:03, Skeeve Stevens wrote:
> I think its only supported on the MX240 and up.

Which is what I said. Unfortunately the release notes were a little
unclear on this.

> ----- Original Message -----
> From: Julien Goodwin [mailto:ausnog at studio442.com.au]
> Sent: Saturday, November 26, 2011 02:58 PM
> To: Ankit Agrawal <Ankit.Agrawal at dodo.com.au>
> Cc: ausnog at ausnog.net <ausnog at ausnog.net>
> Subject: Re: [AusNOG] LAC/LNS hardware recommendation
> 
> On 25/11/11 18:34, Ankit Agrawal wrote:
>> Just wondering if anyone has had any experience with the below Broadband
>> Series routers in a LAC/LNS configuration:
> 
>> 2.       Juniper E series
> 
> The whole E/ERX is coming close to EOL with Juniper.
> 
> The (JunOS running) MXen being their stated replacements. Until recently
> the MXen didn't support L2TP LNS, but the release of 11.4 this month
> fixes that, although it will be first gen quality (and I don't think
> it's available on the MX80, only the larger boxes when they're running
> "trio" line cards).
> 
> The MXen will also be much better base platform for NBN work if needed.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog