[AusNOG] optus/telstra 3g frequencies & HWIC

[Christopher Pollock]

Hi Tony,

I'd be interested to hear about this too as I've been doing some work in the
last few weeks with the 881G with Telstra and it's been pretty good.  It
would be good to know for sure which HWIC to use.  That said, I can't
imagine myself ever deciding to use Optus for 3G connectivity anywhere I was
serious enough to put anything that had a HWIC in.

Cheers,
--
Christopher Pollock,
io Networks Pty Ltd.
e. chris at ionetworks.com.au
p. 1300 1 2 4 8 16
m. 0410 747 765
http://www.ionetworks.com.au
In-house, Outsourced.



On Fri, Jul 8, 2011 at 1:43 PM, Tony <td_miles at yahoo.com> wrote:

> Hi all,
>
> We're looking at wireless backup options, specifically HWIC's in Cisco
> routers. The question I have is in regard to the frequencies used by the
> providers and the HWIC required. It would appear that Telstra use 850MHz and
> Optus use 900MHz (and possibly 2100MHz).
>
> From the table here:
>
> http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps7272/product_data_sheet0900aecd80600f41.html
>
> It says that part HWIC-3G-HSPA supports "HSPA: 850, 1900, and 2100 MHz"
> and that HWIC-3G-HSPA-G  supports "HSPA: 900, 1900, and 2100 MHz ".
>
> This leads me to the conclusion that I would need to purchase a different
> HWIC depending on which provider's network I'm wishing to use (850 or 900) ?
>
> This seems very annoying to me, because the specs on the PCEX-3G-HSPA-G
> modem for the 881G routers says it does all of 850/900/1900/2100 (ie. it
> should do both Telstra & Optus with same modem).
>
> Is this correct ? Does anyone have practical experience with this ?
>
>
> Thanks,
> Tony.
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20110708/cbed7450/attachment.html>