[AusNOG] IPV6 OSPF on ASA 5500 series

[John.Gibbins at csiro.au]

I was told earlier this year that OSPFv3 was expected by the end of this year.  Doesn't look like that is going to happen! 
We've had to live with static routes for three years now.  :-(

At least with IPv6 we don't need so many routes.  If we had to use static for IPv4 it would be REALLY ugly.

I'm also waiting on DHCPv6 relay and the ability to set the M/O flags and unset the autoconfig flag on RAs...
--
John Gibbins
Technical Lead - IT Security/Authentication (and IPv6 Evangelist)
CSIRO Information Management & Technology (IM&T)
Phone: +61 2 6124 1419  | Fax: +61 2 6124 1414 | Mob: 0419 605 562
John.Gibbins at csiro.au | www.csiro.au 
PO BOX 225, Dickson  ACT 2602
The only way of discovering the limits of the possible is to venture a little way past them into the impossible. - Clarke's Second Law


-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Cooper Lees
Sent: Friday, 2 December 2011 6:29 PM
To: Dobbins, Roland
Cc: ausnog (ausnog at ausnog.net)
Subject: Re: [AusNOG] IPV6 OSPF on ASA 5500 series

FYI: The Juniper SRX range has complete OSPFv3 support.

Cooper

On 02/12/2011, at 6:25 PM, "Dobbins, Roland" <rdobbins at arbor.net> wrote:

> On Dec 2, 2011, at 2:06 PM, Greg Macsok wrote:
>
>> Can anyone on AUSNOG advise if the Cisco ASA 5500's (5510/5520 specifically) support IPV6 OSPF?
>
> <https://supportforums.cisco.com/thread/2108669>
>
> -----------------------------------------------------------------------
> Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>
>
>        The basis of optimism is sheer terror.
>
>              -- Oscar Wilde
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog