[AusNOG] Pull stats from a Cisco SHDSL WIC via SNMP

[Matthew Moyle-Croft]

Usually that's vendor specific.  So, have you asked the vendor?

MMC

On 25/08/2010, at 10:22 AM, Tim Warnock wrote:

Hi All,

I want to do some advanced stats collection on a couple of SHDSL lines.

I've got all the basic things like up/down, byte/packet counters etc etc via
the base SNMP interface stats.

I'd like to be able to grab things like: sync rate/loop attenuation/TX
power/CRC errors etc etc (which are all available via CLI) but I haven't had
much luck with finding a good MIB/OID list that lets me grab this data via
SNMP.

I'm hoping someone has done this before and could help me out or at least
point me in the right direction.

Thanks,
Tim.



_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog

--
Matthew Moyle-Croft
Peering Manager and Team Lead - Commercial and DSLAMs
Internode /Agile
Level 5, 162 Grenfell Street, Adelaide, SA 5000 Australia
Email: mmc at internode.com.au<mailto:mmc at internode.com.au>    Web: http://www.on.net<http://www.on.net/>
Direct: +61-8-8228-2909      Mobile: +61-419-900-366
Reception: +61-8-8228-2999        Fax: +61-8-8235-6909

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20100825/457494f0/attachment.html>