[AusNOG] bonding many ADSL2 connections

[Nathan Ridge]

Hi Guys,

Due to the lack of affordable high bandwidth solutions available up here 
in Mackay, I am entertaining the idea of getting a Cisco 2851 and 
running 6-10 ADSL WIC modules and bonding Telstra ADSL2 links to create 
a 6mbit to 10mbit link. Using a few of NM-2W modules theoretically I can 
fit 10 WIC-1ADSL in a 2851 and load-balance them to make 80mbit/10mbit, 
CEF handling the load-balancing outbound across even metric routes.

Ive had good success in the past doing this with 2 x ADSL2 to make a 
2mbit service but not more than 2. Has anyone tried with 4 or more ?

Any past experiences, thoughts, recommendations appreciated.

Cheers

-- 

*Nathan Ridge*
*Systems Administrator*

*Matilda Internet*

________________

(Telephone +61 7 4953 0711
(Fax +61 7 4953 0717
29 Gregory Street, Mackay, QLD 4740, Australia
* Email ridgey at matilda.net.au
<mailto:ridgey at matilda.net.au>Website _www.matilda.net.au
_ <http://www.matilda.net.au/>

This email and any files transmitted with it are confidential and are 
intended solely for the use of the individual or entity to whom it is 
addressed.  If you are not the recipient be advised that you have 
received this email in error and that any use, dissemination, 
forwarding, printing copying or use of the contents contained in this 
e-mail and any file attachments is strictly prohibited.  If you have 
received this email in error please immediately notify the sender by 
telephone or by reply email to the sender.  You must destroy the 
original transmission and its contents.  It is recommended that you 
virus test the information and any attachments.  Matilda Internet does 
not accept liability for any loss or damage howsoever occurred as a 
result of this email transmission or any attachments to it.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20100806/768babb4/attachment.html>