[AusNOG] NBN Co Layer 2 vs. Layer 3 Services

Sean K. Finn sean.finn at ozservers.com.au
Tue Apr 27 13:16:25 EST 2010


As far as I am aware, I believe energex in QLD run fibre with most of their high voltage equipment to monitor Transformers and ring mains, and for optional control, too. From memory this is how UECOMM was born: United Energy Communications? 

We currently use wireless metering for all of our sites, I think it might be attached to an internal sim card + antenna in the meter box, but if every home is connected, long term it would make sense.

Would be a good idea to replace the current signalling to turn hot water on/off inducing noise in some old analogue systems late at night, too.

Sean.

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Daniel Hooper
Sent: Tuesday, 27 April 2010 1:07 PM
To: 'ausnog at ausnog.net'
Subject: Re: [AusNOG] NBN Co Layer 2 vs. Layer 3 Services

Reading power meters remotely was another major service I heard from somewhere that would be running over the NBN infrastructure.

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Daniel Hood
Sent: Tuesday, 27 April 2010 10:23 AM
To: Narelle
Cc: ausnog at ausnog.net
Subject: Re: [AusNOG] NBN Co Layer 2 vs. Layer 3 Services

That makes sense now.

So they are aiming at the whole "one cable" to each home thing.
Instead of having one each for phone, data and TV. Are there any other
services except for these general three they are aiming to push down
this one cable? I suppose the possibilities are pretty endless as is
though.

I was thinking more government multicast VOIP page sort of thing. If
they wanted to advise the public at large of something, such as Conroy
has seen the error of his ways and decided not to filter the internet
or mainly that twitter feed FakeConroy because it is actually
hilarious...



Regards,

Daniel


On Tue, Apr 27, 2010 at 11:39 AM, Narelle <narellec at gmail.com> wrote:
> On Thu, Apr 22, 2010 at 10:05 AM, Daniel Hood <dsmhood at gmail.com> wrote:
>> They are putting in a multicast network?
>>
>> Is it just like the MBone (or whatever they used to call it)?
>
>
> Nothing like the mbone (multicast backbone). The mbone was an overlay
> network that was multicast enabled and landed mostly in universities.
>
> wikipedia seems to be fairly accurate:
> http://en.wikipedia.org/wiki/Mbone
>
> NBN Co, from what I can unravel so far, is intending to use some of
> the newer features in GPON gear to make it multicast aware. I'm still
> struggling with how this would work, and have some concerns about the
> stability and interoperability of any such implementation. The
> intention is to facilitate IPTV.
>
>
> --
>
>
> Narelle
> narellec at gmail.com
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog



More information about the AusNOG mailing list