[AusNOG] JunOS Configuration Example for Telstra Wholesale

[Shane Short]

Hi Ben,
Thanks for that, seems to have done the trick-- I'll file that one  
away somewhere safe.

-Shane



On 04/09/2009, at 2:53 PM, Ben Dale wrote:

> Hi Shane,
>
> This is a working Telstra Business Direct config, but should still  
> work:
>
> bdale at j2320-jsr# show interfaces at-1/0/0
> description "ADSL to Telstra Internet Direct 073xxxxxxx";
> encapsulation ethernet-over-atm;
> atm-options {
>   vpi 8;
> }
> dsl-options {
>   operating-mode auto;
> }
> unit 0 {
>   encapsulation ppp-over-ether-over-atm-llc;
>   vci 8.35;
> }
>
> bdale at j2320-jsr# show interfaces pp0
> unit 0 {
>   ppp-options {
>       chap {
>           default-chap-secret "$9$arJHqPTgDfsDzlK8X-d"; ## SECRET-DATA
>           local-name "xxxxxxxxx at direct.telstra.net";
>           passive;
>       }
>   }
>   pppoe-options {
>       underlying-interface at-1/0/0.0;
>       client;
>   }
>   family inet {
>       mtu 1492;
>       negotiate-address;
>   }
> }
>
>
> Cheers,
>
> Ben
>
>
>
> On 04/09/2009, at 3:58 PM, Shane Short wrote:
>
> Probably should've been more specific, this is a Telstra Wholesale
> ADSL service (Internode, if that helps).
> Doing a tcpdump on the ATM interface, I'm seeing the following:
>
>> monitor traffic interface at-1/0/0
> verbose output suppressed, use <detail> or <extensive> for full
> protocol decode
> Address resolution is ON. Use <no-resolve> to avoid any reverse lookup
> delay.
> Address resolution timeout is 4s.
> Listening on at-1/0/0, capture size 96 bytes
>
> 23:34:40.803573 Out PPPoE PADI [Host-Uniq UTF8] [Service-Name "- 
> snip-"]
> 23:34:40.959636  In PPPoE PADO [AC-Name "qcyb-charlotte"] [Host-Uniq
> UTF8] [Service-Name UTF8]
> 23:34:43.806796 Out PPPoE PADR [Host-Uniq UTF8] [Service-Name "-
> snip-"] [AC-Name UTF8]
> 23:34:43.896941  In PPPoE PADS [ses 4628] [Service-Name "-snip-"]
> [Host-Uniq UTF8] [AC-Name UTF8]
> 23:34:43.905417 Out PPPoE  [ses 4628]LCP, Conf-Request (0x01), id 18,
> length 16
> 23:34:44.065427 Out PPPoE  [ses 4628]LCP, Conf-Ack (0x02), id 139,
> length 21
> 23:34:56.062686 Out PPPoE  [ses 4628]LCP, Echo-Request (0x09), id 128,
> length 10
> 23:35:03.661497 Out PPPoE  [ses 4628]LCP, Echo-Request (0x09), id 129,
> length 10
> 23:35:13.612944 Out PPPoE  [ses 4628]LCP, Term-Request (0x05), id 19,
> length 6
>
> I'm seeing the LAC obviously, but the session isn't coming up..
>
>
>
> On 04/09/2009, at 1:33 PM, Shane Short wrote:
>
>> Hi Guys,
>> I've got a remote client trying to configure their shiny new  
>> J2320-- I
>> was wondering if anyone had any configuration templates or any  
>> gotchas
>> that we need to be aware of?
>>
>> Shane
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>