[AusNOG] JunOS Configuration Example for Telstra Wholesale

[Shane Short]

Probably should've been more specific, this is a Telstra Wholesale  
ADSL service (Internode, if that helps).
Doing a tcpdump on the ATM interface, I'm seeing the following:

 > monitor traffic interface at-1/0/0
verbose output suppressed, use <detail> or <extensive> for full  
protocol decode
Address resolution is ON. Use <no-resolve> to avoid any reverse lookup  
delay.
Address resolution timeout is 4s.
Listening on at-1/0/0, capture size 96 bytes

23:34:40.803573 Out PPPoE PADI [Host-Uniq UTF8] [Service-Name "-snip-"]
23:34:40.959636  In PPPoE PADO [AC-Name "qcyb-charlotte"] [Host-Uniq  
UTF8] [Service-Name UTF8]
23:34:43.806796 Out PPPoE PADR [Host-Uniq UTF8] [Service-Name "- 
snip-"] [AC-Name UTF8]
23:34:43.896941  In PPPoE PADS [ses 4628] [Service-Name "-snip-"]  
[Host-Uniq UTF8] [AC-Name UTF8]
23:34:43.905417 Out PPPoE  [ses 4628]LCP, Conf-Request (0x01), id 18,  
length 16
23:34:44.065427 Out PPPoE  [ses 4628]LCP, Conf-Ack (0x02), id 139,  
length 21
23:34:56.062686 Out PPPoE  [ses 4628]LCP, Echo-Request (0x09), id 128,  
length 10
23:35:03.661497 Out PPPoE  [ses 4628]LCP, Echo-Request (0x09), id 129,  
length 10
23:35:13.612944 Out PPPoE  [ses 4628]LCP, Term-Request (0x05), id 19,  
length 6

I'm seeing the LAC obviously, but the session isn't coming up..



On 04/09/2009, at 1:33 PM, Shane Short wrote:

> Hi Guys,
> I've got a remote client trying to configure their shiny new J2320-- I
> was wondering if anyone had any configuration templates or any gotchas
> that we need to be aware of?
>
> Shane
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog