From dgwatson1988 at gmail.com Fri Jul 8 11:29:27 2022 From: dgwatson1988 at gmail.com (Daniel Watson) Date: Fri, 8 Jul 2022 11:29:27 +1000 Subject: [AusNOG Classifieds] /23 IPV4 Subnet Available Message-ID: Hi Guys, I have a /23 available for immediate rehoming, If you are interested please contact me directly to discuss further. Cheers Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL: From glp71s at gmail.com Thu Jul 28 10:07:31 2022 From: glp71s at gmail.com (Giles Pollock) Date: Thu, 28 Jul 2022 10:07:31 +1000 Subject: [AusNOG Classifieds] Dell M1000e Blade Centre and blades for sale Message-ID: Hi Everyone, I have a Dell M1000e and five blades currently looking for a new home somewhere, details are below: Bladecentre chassis - 1TXYC2S Has two PowerConnect M8024-K (5TXYC2S and 4TXYC2S) and two PowerConnect M6348 (7TXYC2S and 6TXYC2S) I have a feeling it might have been upgraded a bit since purchase, but it definitely has at least six PSUs in it. Blade specs are as follows: M620 - 91HW622 128gb RAM, 2 1TB SAS 7200RPM drives (9RZ268-150) Dual e5-2640v2 xeon CPUs M710HD - 2TXYC2S 128gb RAM, 2 200GB SAS 15kRPM drives (9SW066-150) Dual x5670 xeon CPUs M620 - 5QF3X02 128gb RAM, 1 146GB SAS 15kRPM (9SV066-150) and 1 600gb SAS 10kRPM (9TG066-150) Dual e5-2640v2 xeon CPUs M620 - 3H3JW22 128gb RAM, 2 146GB SAS 15kRPM (one 9SV066-150 and one MK1401GRRB) Dual e5-2695v2 xeon CPUs Also contains iDrac vFlash 8GB SD card and two 2gb standard SD cards M710HD - 3TXYC2S 128gb RAM, 2 300GB SAS 15kRPM (9SW066-150) Dual x5670 xeon CPUs Has a Windows 2008 license sticker I also have a few blanks for the blade centre chassis as well as some accessory cables (twinax cross connects etc) Looking for about $2500 for the lot, would prefer not to separate parts. Located in Melbourne (inner region). Might make a decent home lab if you don't mind the noise and power bill? -------------- next part -------------- An HTML attachment was scrubbed... URL: