<div dir="ltr">Hi Paul,<br><br>On 13 March 2017 at 12:26, Paul Holm <<a href="mailto:ausnog@pkholm.com">ausnog@pkholm.com</a>> wrote:<br>><br>> Did you try it with FTTN NBN? It seems Juniper did not add vectoring support to SRX110, It seems to be supported only on VDSL PIM<br><br>I know people running SRX110 w/ vectoring on NBN FTTN.<div><br></div><div>See: <a href="https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=7136">https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=7136</a><div><br></div><div>Run "show system firmware" to check your current VDSL firmware rev.; I'm running an SRX210H -- not on NBN -- with firmware 2.16.0. I think this is the version you want/need for NBN. The previous release was 2.10.0.</div><div><br></div><div>In theory, vectoring support was added in 12.3X48-D35 and newer, which /is/ supported on SRX110.</div><div><br></div><div>The firmware isn't automatically upgraded w/ Junos, so once you're on a Junos release that supports vectoring, you'll need to run "request system firmware upgrade [...]" to initiate the upgrade.<br></div><div><br></div><div>Cheers,</div><div>Dale</div><div><br></div><div>><br>> > On 7 Mar 2017, at 12:15 PM, Tim Raphael <<a href="mailto:raphael.timothy@gmail.com">raphael.timothy@gmail.com</a>> wrote:<br>> ><br>> > +1 on this one.<br>> ><br>> > As long as you apply the DSL firmware update they're solid as. I've had over a hundred of these deployed without many issues at all.<br>> ><br>> > Regards,<br>> ><br>> > Tim Raphael<br>> ><br>> >> On 7 Mar 2017, at 12:02 pm, Brad Peczka <<a href="mailto:brad@bradpeczka.com">brad@bradpeczka.com</a>> wrote:<br>> >><br>> >> I know I'm late to the party here... but how about a Juniper SRX110H2-VA?<br>> >><br>> >> Inbuilt VDSL2/ADSL2+ modem, full firewall with UTM (if you want it), and can generally be had for a very reasonable price.<br><br></div></div></div>