<div dir="ltr"><div>HI all,</div><div><br></div><div>I've got Optus ADSL and dynamic public IP.</div><div>Needed 6-in-4 tunnel (IPv6 encapsulated into IPv4 tunnel), tried using Hurricane Electric IPv6 provider, as I saw positive reviews.</div><div>I got Juniper SRX 110 modem and have implemented configuration as stated on <a href="http://forums.juniper.net/t5/SRX-Services-Gateway/HE-IPv6-tunnel-with-flow-based-IPv6-in-10-4/td-p/69338/highlight/true/page/3">http://forums.juniper.net/t5/SRX-Services-Gateway/HE-IPv6-tunnel-with-flow-based-IPv6-in-10-4/td-p/69338/highlight/true/page/3</a></div><div><br></div><div>Issue is – my public IP (on at-1/0/0.0 interface) keeps changing every time I attempt the tunnel.</div><div>This is a twofold problem:</div><div>1. on Hurricane Electric page, you need to specify one endpoint of the tunnel, i.e. your public IP</div><div>2. In configuration of ip-0/0/0.0 interface (tunnel interface) on Juniper SRX, you need to specify your tunnel source IP (a public IP). There doesn't seem to be a trick like with Cisco, to use ip unnumbered and imply IP address from your WAN interface...</div><div><br></div><div>Why would an attempt to establish a IPv4 tunnel to another host trigger my public IP to be changed?</div><div><br></div><div>I'm wondering if anyone has experienced the same or similar issue?</div><div><br></div><div>Thanks,</div><div><br></div><div>Alex</div></div>