<p dir="ltr">Hi Tom,</p>
<p dir="ltr">As you have alluded, multiple VLAN interfaces inside the VPLS adds them to a single broadcast domain allowing flooding between them and is not desirable. </p>
<p dir="ltr">I see "vlan-id-list" available and pass syntax check on SRX220, that may solve your issue;</p>
<p dir="ltr"><a href="http://www.juniper.net/techpubs/en_US/junos12.2/topics/reference/configuration-statement/vlan-id-list-edit-interfaces-vpls.html">http://www.juniper.net/techpubs/en_US/junos12.2/topics/reference/configuration-statement/vlan-id-list-edit-interfaces-vpls.html</a></p>

<p dir="ltr">Cheers,<br>
Matt<br>
</p>
<div class="gmail_quote">On 07/02/2014 4:46 AM, "Tom Storey" <<a href="mailto:tom@snnap.net">tom@snnap.net</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Thought I might try my luck here as Im running out of places to ask<br>
about this. :-)<br>
<br>
But Im looking for anyone who has implemented VPLS using SRX hardware<br>
(240 and lower) and perhaps anyone that has implemented it in a semi<br>
specific way, that being multiple logical interfaces with different<br>
VLAN IDs assigned in the same VPLS routing-instance.<br>
<br>
I seem to be hitting a road block in that one sub-int with VLAN works<br>
perfectly fine, but as soon as you add a second with a different VLAN<br>
it all falls in a heap.<br>
<br>
FWIW if I assign an entire interface to the routing-instance I can<br>
trunk VLANs until the cows come home just fine, but Im looking for a<br>
solution where I could have an aggregation interface hooked up to a<br>
switch and pick and choose which interfaces go in to which VPLS or VRF<br>
for example.<br>
<br>
Im not looking to merge the VLANs together to form one large broadcast<br>
domain, but rather want to maintain the VLANs across the VPLS so I<br>
can, in a way, "trunk" multiple VLANs in at any given site and pick<br>
them out as required at other sites.<br>
<br>
Would appreciate contact from anyone who can help, Ive been through<br>
probably just about every piece of sample configuration and<br>
configuration guide I can find and just cant seem to find the answer.<br>
At the moment I feel like Im going in circles.<br>
<br>
Thanks<br>
Tom<br>
_______________________________________________<br>
AusNOG mailing list<br>
<a href="mailto:AusNOG@lists.ausnog.net">AusNOG@lists.ausnog.net</a><br>
<a href="http://lists.ausnog.net/mailman/listinfo/ausnog" target="_blank">http://lists.ausnog.net/mailman/listinfo/ausnog</a><br>
</blockquote></div>