<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>RE: [AusNOG] bonding many ADSL2 connections</TITLE>
</HEAD>
<BODY><p><font size=2 color=navy face=Arial>
I'd check how many of the same WICs are supported in software (whether you can physically insert them is another thing) <br><br>Looks like the 2851 supports 4....</font></p>
<p><hr size=2 width="100%" align=center tabindex=-1>
<font face=Tahoma size=2>
<b>From</b>: ausnog-bounces@lists.ausnog.net <ausnog-bounces@lists.ausnog.net>
<br><b>To</b>: Nathan Ridge <ridgey@matilda.net.au>; ausnog@lists.ausnog.net <ausnog@lists.ausnog.net>
<br><b>Sent</b>: Fri Aug 06 16:24:20 2010<br><b>Subject</b>: Re: [AusNOG] bonding many ADSL2 connections
<br></font></p>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>You can use GRE tunnels across the links (or even bypass that completely if you're doing Layer 2) and then use per-packet load balancing on a private AS. Dirty, but it works.<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: ausnog-bounces@lists.ausnog.net on behalf of Nathan Ridge<BR>
Sent: Fri 8/6/2010 4:00 PM<BR>
To: ausnog@lists.ausnog.net<BR>
Subject: [AusNOG] bonding many ADSL2 connections<BR>
<BR>
Hi Guys,<BR>
<BR>
Due to the lack of affordable high bandwidth solutions available up here<BR>
in Mackay, I am entertaining the idea of getting a Cisco 2851 and<BR>
running 6-10 ADSL WIC modules and bonding Telstra ADSL2 links to create<BR>
a 6mbit to 10mbit link. Using a few of NM-2W modules theoretically I can<BR>
fit 10 WIC-1ADSL in a 2851 and load-balance them to make 80mbit/10mbit,<BR>
CEF handling the load-balancing outbound across even metric routes.<BR>
<BR>
Ive had good success in the past doing this with 2 x ADSL2 to make a<BR>
2mbit service but not more than 2. Has anyone tried with 4 or more ?<BR>
<BR>
Any past experiences, thoughts, recommendations appreciated.<BR>
<BR>
Cheers<BR>
<BR>
--<BR>
<BR>
*Nathan Ridge*<BR>
*Systems Administrator*<BR>
<BR>
*Matilda Internet*<BR>
<BR>
________________<BR>
<BR>
(Telephone +61 7 4953 0711<BR>
(Fax +61 7 4953 0717<BR>
29 Gregory Street, Mackay, QLD 4740, Australia<BR>
* Email ridgey@matilda.net.au<BR>
<<A HREF="mailto:ridgey@matilda.net.au">mailto:ridgey@matilda.net.au</A>>Website _www.matilda.net.au<BR>
_ <<A HREF="http://www.matilda.net.au/">http://www.matilda.net.au/</A>><BR>
<BR>
This email and any files transmitted with it are confidential and are<BR>
intended solely for the use of the individual or entity to whom it is<BR>
addressed. If you are not the recipient be advised that you have<BR>
received this email in error and that any use, dissemination,<BR>
forwarding, printing copying or use of the contents contained in this<BR>
e-mail and any file attachments is strictly prohibited. If you have<BR>
received this email in error please immediately notify the sender by<BR>
telephone or by reply email to the sender. You must destroy the<BR>
original transmission and its contents. It is recommended that you<BR>
virus test the information and any attachments. Matilda Internet does<BR>
not accept liability for any loss or damage howsoever occurred as a<BR>
result of this email transmission or any attachments to it.<BR>
<BR>
<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>