[AusNOG] Transceiver for dark fiber.

DaZZa dazzagibbs at gmail.com
Tue Aug 17 12:37:41 EST 2021


hey Alex

I've used fs.com tranceivers extensively, as others have said, and as
long as you get them coded correctly (specify your vendor when
ordering), they're pretty good.

With Vocus, I have found that the stated length of the DF link is
often - well, understated. So your 11k link could quite likely end up
being 12 or 13 (I had one which was listed in all Vocus' documentation
and testing reports as 37k's - could not, for the life of me, get a
10Gb-ER tranceiver working on the link with an acceptable loss - had
to go to a ZR to bring the link up).

I'd recommend you stick ER tranceivers in this link (good for up to
40k's) - and probably go 1550nm rather than 1310. FS has heaps of
them, and they're not anywhere near as expensive as genuine Cisco
ones. You can try a pair of LR's for shits and giggles (they're only
about $40 each), but I'd almost bet they won't work unless you're very
luck with the number of joints in the link and the insertion loss
levels.

You *might* need a 3dB attenuator on each end - but they'll sell you
those too - and if your receive power isn't above the limit, you can
get away with removing it.

One thing to note is that if you use a non-genuine transceiver and
have to log a TAC case, Cisco will immediately tell you so sod off
when you log it because it's not "supported" - so it comestimes pays
to keep a genuine one on hand to swap into the switch in case you have
an issue - but if it's only one link, it's debatable if it's worth
doing that - keep a couple of spare FS ones in case they go bad.

D

P.S. I am not affiliated in any way with fs.com - just a satisified customer.

On Tue, 17 Aug 2021 at 10:59, Alex Voigt <alex at advtech.com.au> wrote:
>
> Greetings.
>
>
>
> Looking for recommendations for a SFP type Transceiver for 11km dark fibre Vocus service.
>
>
>
> Anyone has any recommendations for what they have used successfully.
>
>
>
> Alex Voigt
>
>
>
> ADV Technical Consulting
>
> 3 Furniss Road
>
> Landsdale W.A. 6065
>
> Tel:   08 9302 4866
>
> Fax:  08 9302 4844
>
> Mob: 0419 010 191
>
>
>
>
>
> Please make a note to use the following email addresses to ensure a prompt response
>
> For Support - support at advtech.com.au & Admin/Accounts - info at advtech.com.au
>
>
>
>
>
> Disclaimer
>
> The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
>
> This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog



-- 
veg·e·tar·i·an:
Ancient tribal slang for the village idiot who can't hunt, fish or ride


More information about the AusNOG mailing list