[AusNOG] Telstra EA 2gbps STD CoS - Experience

[Nathan Brookfield]

Cameron,

What devices do you have on each end?

Nathan Brookfield
Chief Executive Officer

Simtronic Technologies Pty Ltd
http://www.simtronic.com.au

> On 30 Sep 2019, at 08:31, Cameron Murray <cameron.murray at gmail.com> wrote:
> 


Morning,

Wondered if anyone has had any experience with this type of service? We've just installed our first since it was released in May and performance is a mixed bag and Support have been little to no help as their RFC testing does not go above 1gbps.

We've seen latency change from .5ms from A > B to 3.2ms and single thread TCP performance drop from 900/850 to the following testing with iPerf:

[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   159 MBytes   133 Mbits/sec   12             sender
[  4]   0.00-10.00  sec   159 MBytes   133 Mbits/sec                  receiver

[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  38.4 MBytes  32.2 Mbits/sec    0             sender
[  4]   0.00-10.00  sec  38.2 MBytes  32.1 Mbits/sec                  receiver

Before we modify the service to Premium I was hoping to get a benchmark.

TIA.

Cameron
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog