[AusNOG] Cost effective 10G full feed BGP router for IPv4 & IPv6

[Kristoffer Sheather @ CloudCentral]

A 1U server with dual 10G LOM ports and 2 x HotLava Systems quad port 10G 
cards with your choice of OS.
  

----------------------------------------
 From: "Matt Perkins" <matt at spectrum.com.au>
Sent: Friday, August 5, 2016 9:21 AM
To: ausnog at lists.ausnog.net
Subject: Re: [AusNOG] Cost effective 10G full feed BGP router for IPv4 & 
IPv6   
 A Mikrotik CCR1072 has 8 ports if that's enough. Other then that your in 
L3 Switch territory I would think.

Matt
 

On 5/08/2016 9:17 AM, Matthew Barnett wrote:

I am after suggestions for a 10G router with at least 10 x 10G ports within 
a 1RU form factor, any suggestions?  

   

Full routing table is a must.  

   

Thanks Matt   

        

 _______________________________________________ AusNOG mailing list 
AusNOG at lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog     
 

   

 --  /* Matt Perkins          Direct 1300 137 379        Spectrum Networks 
Ptd. Ltd.          Office 1300 133 299        matt at spectrum.com.au          
                           Level 6, 350 George Street Sydney 2000         
Spectrum Networks is a member of the Communications Alliance & TIO   */     


Message protected by MailGuard: e-mail anti-virus, anti-spam and content 
filtering.
http://www.mailguard.com.au/mg 
Report this message as spam   
 
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20160805/0e87dc20/attachment-0001.html>