[AusNOG] Internode IPv6 Support

[David Beveridge]

On Mon, Oct 19, 2015 at 1:12 PM, Delan Azabani <delan at azabani.com> wrote:

> I'm not an Internode employee, but I'm a customer who has IPv6 working.
>
> What does your setup look like? In short:
>
Mikrotik CCR1009 on NBN.
The IPv6 Protocol is enabled on Internode Control Panel.

>
> • Use one PPP session for both protocols.
>
Done

> • Acquire an IPv4 address with PPP IPCP (RFC 1332).
>
Done & working

> • Negotiate an IPv6 interface identifier with PPP IPv6CP (RFC 5072).
>
Working (I get fe80::12/64)

> • Acquire a dynamic /64 prefix with NDP Router Solicitation (RFC 4861).
>
Note sure about this one, no IPv6 Address is appearing

> • Acquire a static /56 prefix with DHCPv6 IA_PD (RFC 3633).
>
Sending IA_PD, no response.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20151019/5c0eefc2/attachment.html>