[AusNOG] Improving rack density with different cable management

James Hodgkinson yaleman at ricetek.net
Wed May 28 08:27:01 EST 2014


We use the APC equivalent, they're nigh on magic. No RU's wasted on cable
management if you've got racks with space on the sides.


On 27 May 2014 16:09, <James.Baird at gwf.com.au> wrote:

>
> +1 to Panduit, if you can install 750mm wide racks. Angled patch panels +
> side mounted vertical cable management. Easily fits 480 ports per rack.
> https://www.dropbox.com/s/wkadtc8us5sxdql/20140527_155329.jpg
>
>
>
>
>
>  *Paul Gear <ausnog at libertysys.com.au <ausnog at libertysys.com.au>>*
> Sent by: "AusNOG" <ausnog-bounces at lists.ausnog.net>
>
> 05/27/2014 03:36 PM
>   To
> ausnog at lists.ausnog.net
> cc
>   Subject
> [AusNOG] Improving rack density with different cable management
>
>
>
>
> Hi all,
>
> Most of our sites have fairly simple cable management using traditional
> cable management like this:
> https://www.dropbox.com/s/nc7bmgs7j85laeq/20140527_145239.jpg
>
> This is easy to work with in most cases where we don't have high port
> counts.  However, once you push 48 Cat6 cables into them they can get a
> bit tight.
>
> We have some new sites which are coming online that require up to 288
> ports per floor, and these will not fit in the single rack provided for
> the floor if we use traditional cable management, once all the patching,
> switching, and UPS requirements are taken into account.  We will still
> have 750-800 mm wide racks, so I was hoping to find something that could
> be mounted at the side of the rack and protrude towards the front, so
> that we could use all the rack frontage for either patch panels or
> switch ports.  Some larger chassis switches seem to have this sort of
> thing built in, e.g.
> http://product-images.www8-hp.com/digmedialib/prodimg/lowres/c03131047.png
>
> Searching Google suggests that there are plenty of options which look OK
> for low-density deployment, e.g.
>
> http://www.fibersavvy.com/store/i/is.aspx?path=/Shared/images/21_Cable%20Management/PP4-3197-1U_04.jpg&lr=t&bw=550&w=550&bh=550&h=550
> but putting up to 48 Cat6 cables on that would not work, in my opinion.
> What I was hoping to find is something that would allow cables to be
> laid in horizontally, more like the L-shaped lower part of our existing
> Krone cable management, but a little longer and a little wider (say,
> 70-90mm deep and 30mm wide), and possibly with a number of different
> channels in it to separate different groups of cables.
>
> Does anyone know of such a system?  Are there other options which would
> allow us to cram in better Cat6 port densities?
>
> Thanks in advance,
> Paul
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
> **************************************************
> This email and its attachments are confidential and subject to copyright. If they have come to you in error please notify us immediately by return mail, and then delete the email. You should take no action based upon the contents nor should you use, copy or show them to anyone.
> Any views or opinions expressed are those of the author and do not necessarily represent those of George Weston Foods Ltd.
> Security: Internet email is not a secure medium; please note this when considering the content of your message.
> Viruses: GWF takes precaution to ensure email is free of viruses but cannot guarantee this. GWF scans all in and outbound email and attachments, however GWF accepts no liability for damage caused by this email or the attachments due to virus interference, interception, corruption or unauthorised access.
>
> Please consider our environment before printing this email.
> **************************************************
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140528/aab501ae/attachment.html>


More information about the AusNOG mailing list