[AusNOG] Juniper SRX when to use proxy arp

[Simon Dixon]

Mark,

The following KB from Juniper helps explain when to and not to use proxy
arp.

http://kb.juniper.net/InfoCenter/index?page=content&id=KB21785

Regards

Simon.


On 2 December 2014 at 18:03, Mark Anthony Delfin <mark at delfin.me> wrote:

> Hi List,
>
> I have a couple of SRX240/250 clusters and it has  destination NATs.
> Destination IP is not the SRX interface.   Do I need to set up proxy arp.
> It seems to be working without it?
>
> What will be the possible situations that i will need to have(or not to
> have) proxy-arp settings?
>
> Thank you.
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
> --
>
> Dicko.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20141202/60873628/attachment.html>